SIKA CORPORATION -- 432 SIKAFLEX 1C SL -- - 
=====================  Product Identification  =====================

Product ID:432	SIKAFLEX 1C SL
MSDS Date:12/11/1996
FSC:NIIN:Submitter:F BT
Status Code:A
=== Responsible Party ===
Company Name:SIKA CORPORATION
Address:1682 MARION-WILLIAMSPORT ROAD
City:MARION
State:OH
ZIP:43302
Country:US
Info Phone Num:614-387-9224
Emergency Phone Num:740-387-9224
Chemtrec Ind/Phone:(800)424-9300
CAGE:0PMN0
=== Contractor Identification ===
Company Name:SIKA CORPORATION
Address:201 POLITO AVE
Box:City:LYNDHURST
State:NJ
ZIP:07071
Country:US
Phone:201-933-8800
CAGE:0PMN0

=============  Composition/Information on Ingredients  =============

Ingred Name:POLYISOCYANATE PREPOLYMER

Ingred Name:XYLENE
CAS:1330-20-7
RTECS #:ZE2100000
Minumum % Wt:1.
Maxumum % Wt:5.
ACGIH TLV:434 MG/M3;100 PPM
ACGIH STEL:651 MG/M3;150 PPM
EPA Rpt Qty:1000 LBS
DOT Rpt Qty:1000 LBS

=====================  Hazards Identification  =====================

Routes of Entry: Inhalation:YES  Skin:YES  Ingestion:YES
Health Hazards Acute and Chronic:EYES: IRRITATION. SKIN: REVERSIBLE
    INFLAMMATORY EFFECT ON SKIN/TISSUE AT THE SITE OF CONTACT. ALLERGIC
    SENSITIZATION. INGESTION: GI TRACT IRRITATION/DISORDERS.
    INHALATION: REVERSIBLE INFLAMMATORY EFFE CT ON THE UPPER
    RESPIRATORY SYSTEM.
Effects of Overexposure:IRRITATION, NAUSEA, ULCERATION DIARRHEA,
    CONSTIPATION, INFLAMMATION
Medical Cond Aggravated by Exposure:ASTHMA TYPE CONDITIONS, CHRONIC
    BRONCHITIS & OTHER CHRONIC RESPIRATORY CONDITIONS. PRESENSITIZATION
    TO PRODUCT.

=======================  First Aid Measures  =======================

First Aid:EYES: THOROUGHLY RINSE W/WATER FOR 15 MINS. SKIN: WASH
    THOROUGHLY W/SOAP & WATER. INGESTION: DILUTE W/WATER. DON'T INDUCE
    VOMITING. INHALATION: REMOVE TO FRESH AIR. IF BREATHING HAS
    STOPPED, GIVE CPR.	INGESTION: DON'T INDUCE VOMITING IF
    UNCONSCIOUS.OBTAIN MEDICAL ATTENTION IN ALL CASES.

=====================  Fire Fighting Measures  =====================

Flash Point:=80.C, 176.F
Extinguishing Media:FOAM/WATER FOG/DRY CHEMICAL
Fire Fighting Procedures:WEAR NIOSH/MSHA APPROVED SELF CONTAINED
    BREATHING APPARATUS & FULL USE OF APPROVED RESPIRATOR IS REQUIRED
    IF PEL IS EXCEEDED.
Unusual Fire/Explosion Hazard:DURING A FIRE, IRRITATING/TOXIC GASES &
    AEROSOLS FROM THE DECOMPOSITION/COMBUSTION PRODUCTS MAY BE PRESENT.

==================  Accidental Release Measures  ==================

Spill Release Procedures:WEAR SUITABLE PROTECTIVE EQUIPMENT. CONTAIN
    LEAK & COLLECT W/ABSORBENT MATERIAL & TRANSFER INTO SUITABLE
    CONTAINERS. AVOID CONTACT. VENTILATE ENCLOSED AREA.

======================	Handling and Storage  ======================

Handling and Storage Precautions:STORAGE TEMPERATURE FROM 32F TO 122F.
    KEEP AWAY FROM HEAT/SPARKS & OPEN FLAME. STORE IN TIGHTLY CLOSED
    CONTAINER. PROTECT FROM MOISTURE & FOREIGN MATERIALS.
Other Precautions:IF CLOSED CONTAINER IS EXPOSED TO HEAT, PRESSURE CAN
    BUILD UP. IF MOISTURE ENTERS CONTAINER, PRESSURE BUILD UP DUE TO
    REACTION. IDEAL STORAGE TEMPERATURE 50-80F. AVOID CONTACT W/SKIN.

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:USE A NIOSH/MSHA APPROVED RESPIRATOR REQUIRED IF
    PEL IS EXCEEDED.
Ventilation:MECHANICAL EXHAUST HIGHLY RECOMMENDED.
Protective Gloves:CHEMICALLY RESISTANT RUBBER/PLASTIC
Eye Protection:SAFETY GLASSES/CHEMICAL GOGGLES
Other Protective Equipment:LONG SLEEVE SHIRT & LONG PANTS.
Work Hygienic Practices:REMOVE/LAUNDER CONTAMINATED CLOTHING & SHOES
    BEFORE REUSE.
Supplemental Safety and Health

==================  Physical/Chemical Properties  ==================

Vapor Density:>1
Spec Gravity:1.38
VOC Pounds/Gallon:47
VOC Grams/Liter:.34
Evaporation Rate & Reference:SLOWER THAN ETHER
Appearance and Odor:LIGHT GRAY VISCOUS LIQUID
Percent Volatiles by Volume:3.022

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
WATER, ALCOHOLS & AMINES
Stability Condition to Avoid:HEAT, SPARKS, OPEN FLAMES & OTHER IGNITION
    SOURCES, MOISTURE
Hazardous Decomposition Products:CO, CO2, OXIDES OF NITROGEN
Conditions to Avoid Polymerization:STORAGE ABOVE 122F MAY CAUSE
    POLYMERIZATION W/O HAZARD. IDEAL STORAGE TEMPERATURE IS 50-80F.

====================  Disposal Considerations  ====================

Waste Disposal Methods:DISPOSE OF IN ACCORDANCE W/LOCAL, STATE &
    FEDERAL REGULATIONS.

=====================  Regulatory Information  =====================

SARA Title III Information:SARA TITLE III HAZARD CLASSES: ACUTE HEALTH
    HAZARD. CHRONIC HEALTH HAZARD. THIS PRODUCT CONTAINS THE FOLLOWING
    TOXIC CHEMCIALS SUBJECT TO THE REPORTING REQUIREMENTS OF SECTION
    313 OF THE EMERGENCY PLA NNING & COMMUNITY RIGHT-TO-KNOW ACT
    (EPCRA) OF 1986 & OF 40 CFR 372: CAS# 1330-20-7 XYLENE.

=======================  Other Information  =======================

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.